Відео

Well, so much for that! :-)

Excellent…you explained the system like a true professor 👍😀

Think about it this way, experimenting with a small panel is the way to go because the same logic should apply to a large panel, but the costs are lower if you destroy the panel and also lower costs to get the heat sink to cool the panel.

Thank you converting that 2nd coupling into full slip is a genuis move. I've been dreading putting back together a 1" pipe I cut. This will make it much easier.

Is there away to do for 2 by 2?

Thats the problem with dual/split phase systems in residential properties. We only have single residential phase of 240v in UK and rarely lines run overhead.

Good information and demonstration

😅junk .. they do not work properly. China crap stay away....

Best explanation ever! Thanks a lot Sr!

Why cant you test single wire sensor

WOW, this guy knows his stuff. I thumbed up, subscribed and hit the bell. Can't wait to check out all the other things he shared.

They make them to be next to impossible to repair

Seems like the walmart brand is just as good lol

Thanks!

I have a problem with the 2005 c6 corvette, chevy found a problem with the fuse to the seats. They just took out the fuse. Now, months later, something else is causing a drain.

There’s no video for an agitator that’s stuck… aside from a video from of one with an agitator or whatever that’s nearly flush with the bottom. I can’t get my Kenmore washing machine’s agitator out. I got the 7/16 bolt out of the agitator. Got the top side off, but the bottom is quite literally fused/stuck/glued/one with the wash tub. I can’t get it loose to change out the clutch assembly

what type of cement you used and recommend for this sort of repair jobs please?

Great demonstration

I want to repair some pitting in my pressure cooker. Will a handheld propane torch work for this? I can heat it up mostly on the stovetop as the pitting is inside the vessel. This is even cheaper than jp weld which it looks like is not ideal.

Could this run a pool heat pump rated at 120 volts? If so what would I need?

Boo!!

4:34 make me laugh

This test is actually very consistent with my personal experience with both brands, I've had countless energizers leak and ruin my electronics literally almost every time i use them and i find it quite funny just how bad it is, Whereas if you were to ask me i cannot remember when was the last time i had a Duracell leak on me. I definitely have but it's far far far rarer. Duracell is just the more superior alkaline battery in my opinion even though people often criticize them with names like duraleak and such. My experience has been the exact opposite lol. I have stopped buying energizer batteries after this experience and the only thing i buy is their rechargeable NIMH batteries now as they are made in Japan & cheaper than the chinese Duracell counterparts at least in my country. But honestly the way i see it is that single-use batteries just don't make sense to me at all. You pay so much for batteries that you'll very quickly throw out possibly in landfill & it only makes sense to me to use them in very low power devices like clocks and TV remotes or radios. I wouldn't even use them in such devices if the device is valuable to you as you can never predict when they'll leak. One thing is for sure no matter what battery brand you go with there's no guarantee that they won't leak no matter what the manufacturer claims on their packaging. I haven't bought single-use batteries in years. I do have quite a few laying around from devices that come with them included as i usually take them out and replace them with rechargeables. I keep those single-use batteries that came with such devices for other less valuable lower drain electronics. This way i literally have no reason to ever buy alkaline cells even when i do need them simply because of how much i have laying around from devices that came with included batteries. Most of my electronics run on 18650 21700 26650 14500 batteries and such etc. They are just far far more superior in every possible way. I try to modify the devices that i can that use normal single-use batteries to use such lithium batteries. And the ones that i can't i also have loads of NI-MH cells for those devices. In my opinion it is definitely worth investing in at least NI-MH cells for the average user

I love you lol. Finally hooked up my bluray player after years prob and the remote wasn’t working and the player has no buttons on it except for power and eject. With your help, I got it working.

Great video!

This clear and concise video is another method for window tint and glue removal to add to the collection.👍

Thank you so much, your channel is so helpful to technicians like me to learn more and more

2200uf and a 10k resistor is around 2.1 seconds for those interested in using it in a spot welder as a starting point....

😂😂 Small diameter PVC has plenty of play in the pipe. All that needs to be done is pull the two ends upwards enough so the end of the pipe just catches inside the tee then push the two ends down at the same time. The pipe will slide into the tee. Kink the pvc after heating it and you just created a new headache.

Do you still think this is the best detector? this vid is 4 years old just wondering if you found something newer by now

Or it good be, the tiny rubber under the brake. Happens in some camry

Your link points to many different products. Which exact product did you use in the video?

So which water out of all those is the best????

This works phenomenally well . All you need is the patience to stick with it and let the paint thinner (mineral oil) do the work. It's just a question of work and time. The results are astonishing. Forget all the subtle commercials for WD 40.

с н -молотовым?

You are a great teacher! Thanks for helping me better understand the anatomy and troubleshooting of an a/c unit. I appreciate it! I took my unit apart with confidence and found the issue immediately: there was a dead wasps nest!!! They had built it around the motor and fan, which they warped the plastic fan. But that's okay because everything works and it's an easy cheap fix! Thanks again!

I bought a cheapo Chinese OBD code reader which seems to work. As long as the car runs OK, I prefer my wife's solution: Stick a piece of black electrical tape over the "CHECK ENGINE" light. Problem solved without breaking the bank!!

helpful!

You can show her where the opening code is on that car !

Been better if you had a car driving a t a certain speed then see if the gun matched it

Is it advantageous to switch an older generator driven car and upgrade to an alternator setup?

Wouldn’t both outputs be hot and u would have to tap in the center for neutral?

How did you identify which neutral wire was the one coming from the receptacle?? Thanks

Its very fuccing

Nice, thanks!

Does not work

i know that electronicsNmore

Please do a video about using alum powder to get the broken stem out of the old crown.

Good effort brotha ❤

..great video..thanx..WHAT BATTERY IS THIS, WHERE CAN I BUY IT ? thank in advance, have a good day ..